Affri Portable RSDMAG Rockwell Hardness Tester
PORTABLE HARDENSS TESTER CONFORM TO STANDARDS
ASTM E-18 E-10 E-110 E-103 E384
ISO 6508 6507 6506 Standards
Test loads
From 3 to 187,5 kgf (From 29,42 to 1839 N)
Rockwell and superficial Rockwell ISO 6508 / ASTM E-18
HRA – HRB – HRC – HRD – HRF – HRG – HRL – HRM – HRR / HRN – HRT
Brinell HBWT ASTM E-103 / ISO 6506
1/10 – 1/30 – 2.5/15.6 – 2.5/31.5 – 2.5/62.5 – 2.5/187.5 – 5/125
Vickers ISO 6507 / ASTM E-384 (Indentation only)
HV3 – HV10 – HV15 – HV30 – HV60 – HV100
PORTABLE HARDENSS TESTER CONFORM TO STANDARDS
ASTM E-18 E-10 E-110 E-103 E384
ISO 6508 6507 6506 Standards
Test loads
From 3 to 187,5 kgf (From 29,42 to 1839 N)
Rockwell and superficial Rockwell ISO 6508 / ASTM E-18
HRA – HRB – HRC – HRD – HRF – HRG – HRL – HRM – HRR / HRN – HRT
Brinell HBWT ASTM E-103 / ISO 6506
1/10 – 1/30 – 2.5/15.6 – 2.5/31.5 – 2.5/62.5 – 2.5/187.5 – 5/125
Vickers ISO 6507 / ASTM E-384 (Indentation only)
HV3 – HV10 – HV15 – HV30 – HV60 – HV100
PORTABLE HARDENSS TESTER CONFORM TO STANDARDS
ASTM E-18 E-10 E-110 E-103 E384
ISO 6508 6507 6506 Standards
Test loads
From 3 to 187,5 kgf (From 29,42 to 1839 N)
Rockwell and superficial Rockwell ISO 6508 / ASTM E-18
HRA – HRB – HRC – HRD – HRF – HRG – HRL – HRM – HRR / HRN – HRT
Brinell HBWT ASTM E-103 / ISO 6506
1/10 – 1/30 – 2.5/15.6 – 2.5/31.5 – 2.5/62.5 – 2.5/187.5 – 5/125
Vickers ISO 6507 / ASTM E-384 (Indentation only)
HV3 – HV10 – HV15 – HV30 – HV60 – HV100
Portable hardness tester RSDMAG: how does it work?
Pulling one single start lever the hardness result will appear in a few seconds. Portable hardness tester RSDMAG is so simple and easy to use that there is no need for any particular preparation by the operator:
Identify the test area and place the hardness tester on the sample, no matter the size or geometry
Locking the base lever the magnet will strongly adhere to the test piece for the entire test cycle
Start the test and in 4 seconds the result will appear on the display scale or dial gauge
The RSDMAG solves all types of problems. It can be used as a conventional hardness tester or as a portable system for on-site testing when test pieces are too large or too heavy for a bench hardness tester. The load cell inside has no impact force, while the AFFRI vertical movement permits a fully automatic test cycle in any direction, even upside down.
Thanks to the portable hardness tester RSDMAG with magnetic clamping base it is possible to perform hardness tests on very bulky samples directly in the production department. Try our portable hardness tester on: Oil and Gas pipes (also on-site), valves, tubes and steel bars, flat rolled steel plates, forged steel rings, rails, train wheels, drilling tools, walls and roofs.
Safe clamping on any sample! From round to flat, with self-alignment of the indenter with the measurement axis
Operative at 360°! Completely uninfluenced by direction so that it is operative even upside down
Very fast, even 3″ for one hardness test! (adjustable dwell time)